Montigo H38DF PFC User Manual download pdf (Page 4)

Page 4

XG0816 - 150204.1

H*38DF PFC Peninsula Gas Fireplace

Installation

Due to high operating temperatures, this appliance should be located out of traffic &

away from furniture and draperies.

Children and adults should be alerted to the hazards of the high surface temperature,

which could cause burns or clothing ignition.

Young children should be carefully supervised when they are in the same room as the

appliance.

Clothing or other flammable materials should not be placed on or near the appliance.

CAUTION

When this appliance is installed directly on any combustible material other than wood

flooring, it must be installed on a metal or wood panel extending the full width and

depth of the appliance or a fire will occur causing serious injury, property damage or

even death.

DANGER

Installation Checklist

 Determine the desired install location of your replace.

 See Section 1, Dimensions on Page 5, and refer to the Framing

Section 2 for details.

 Select the location of your termination and resulting vent run.

 Your selected termination location must be the highest point

in the Direct Vent installation.

 Should it be impossible to meet the venting requirements laid

out in Section 3: Venting, please contact a local Montigo dealer

regarding the use of a Montigo Power Vent.

 Lay out the Vent run; calculating the required elbows and straight

runs of 5"/8" flex and/or rigid pipe.

 Layout Electrical Requirements Refer to Section 4: Wiring for

Details.

 Refer to Section 5: Installing the Gas Line for details on the gas

connection and access.

 Refer to local codes and guidelines for installation requirements.

 Installation and repairs should be done by a qualied

contractor and must conform to:

• Installations in Canada must conform to the local codes or in the

absence of local codes to the current version of Natural Gas and Propane

Installation Code, CSA B149. Electrical Installations must conform to

the local codes or, in the absence of local codes, to the current version

of Canadian Electrical Code, CSA C22.1.1

• Installations in the USA must conform to the local codes or in

the absence of local codes to the current version of National Fuel Gas

Code, ANSI Z223.1/NFPA 54. Electrical Installations must conform to

the local codes or, in the absence of local codes, to the current version

of the National Electrical Code, ANSI/NFPA 70. See Appendix C for

installation within the State of Massachusetts.

IMPORTANT MESSAGE: SAVE THESE INSTRUCTIONS

The H*38PF* Direct Vent replace must be installed in accordance with

these Instructions. Carefully read all the Instructions in this manual

rst. Consult the Local Gas Branch to determine the need for a permit

prior to starting the installation. It is the responsibility of the installer to

ensure this replace is installed in compliance with the manufacturers

instructions and all applicable codes.

Before You Start:

Installation and repairs should be done by an authorized gas fireplace service technician.

The appliance should be inspected before use and at least annually by a professional. More

frequent cleaning may be required due to excessive lint from carpeting, bedding material,

etc. It is imperative that control compartments, burners and circulating air passageways of

the fireplace are kept clean.

NOTICE

WARNING

A barrier designed to reduce the risk of burns from hot viewing glass is provided with this

appliance and shall be installed for the protection of children and other at-risk individuals.

If the barrier becomes damaged, the barrier shall be replaced with the manufacturer’s

barrier for this appliance.

WARNING

Any safety screen, guard, or barrier removed for servicing an appliance must be replaced

prior to operating the appliance.

1 2 3 4 5 6 7 8 9 ... 37 38

Comments to this Manuals

No comments

Montigo H38DF PFC User Manual Page 4

Comments to this Manuals

Related products and manuals for For Home Montigo H38DF PFC