Montigo H38DF PFC User Manual download pdf (Page 23)

Page 23

XG0816 - 150204.1

H*38DF PFC Peninsula Gas Fireplace

Installation

Removing the door:

The H*38PF* doors are removed in a few simple steps. Follow these

instructions below to remove the Horizontal access panel, unlatch the

door buckles and, remove the door. Replace in reverse order.

Figure 24a� Locate the door buckles. (Both Sides Typical)

Figure 24� Removing and installing the Horizontal Access Panel

Locate the Door Buckles:

Step 2:

Step 1:

Remove the Horizontal cover

by placing ngers in both nger

holes, then pushing away

from you and lifting out. Place

it aside during maintenance

or cleaning. Install in reverse

order.

Remove the Horizontal Access Panel:

Step 5:

Ensure the tool is rmly

in the lower end of the

slot, (as shown), Then pull

toward you (Caution: hold

the tool securely).

Step 6:

Pull hard if necessary to

release the spring ten-

sion. (Caution: The latch

springs back with force,

hold the tool securely).

Figure 24d�

Figure 24e�

Front View

Door buckles

Small glass door

affixed to frame

with hardware.

Door Latch Hook

Door Latch Slot

Hand-hold

Release the Door Buckles

Figure 24b. Door buckle Tool

Step 4:

Firmly grasp hand-hold

end of Door buckle tool

and place the machined

end in the slot under door

frame. (as shown)

Figure 24c�

Step 3:

Finger Holes

Installed Gas

Valve Cove

Section 8: Installing & Removing the Door

WARNING

When reinstalling door(s), always make sure all door

buckles are properly hooked and fully engaged.

Step 7:

Remove the tool from

the latch slot. Ensure the

latches are hanging freely,

the hook end is released

from the bottom of the door.

(Repeat all 4-steps for the

remaining latches).

Figure 24f�

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Comments to this Manuals

No comments

Montigo H38DF PFC User Manual Page 23

Comments to this Manuals

Related products and manuals for For Home Montigo H38DF PFC